TM 5-3800-205-23-3
UPPER AND LOWER SPRAY BAR REPLACEMENT - CONTINUED
0028 00
LOWER SPRAY BAR INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
1.
Position lower spray bar (35) on water distributor.
2.
Install seal (26) into coupling (25).
3.
Position coupling (25) and manifold (22) on lower spray bar (35). Install two bolts (24) and nuts (23) and tighten cou-
pling.
4.
Install clamp (27) on two places on lower spray bar (35) with two bolts (28), flatwashers (29), new lockwashers (33),
and nuts (34).
5.
Apply a thin coat of sealing compound to coupling (30) and install coupling on each end of lower spray bar (35). Ensure
gasket (31) is installed inside coupling.
6.
Install plug (32) in each coupling (30) and lock camlocks.
NOTE
Ensure alignment marks are aligned on nozzles and lower spray bar when installed.
7.
Apply a thin coat of sealing compound to nozzle threads and install seven nozzles (36) on lower spray bar (35).
8.
Install hose reel assembly and mounting plate (WP 0030 00).
9.
Fill tank with water, discharge water from lower spray bar, and check for leaks (TM 5-3800-205-10-2).
END OF WORK PACKAGE
0028 00-5
