TM 5-3800-205-23-3
CONTROL PANEL AND AIR HOSES MAINTENANCE - CONTINUED
0029 00
CONTROL PANEL AIR VALVE REMOVAL
NOTE
The following steps are to be used for all control panel air valves. SUCTION LOADING is shown.
1.
Loosen but do not remove six screws (9) and panel locks (10).
2.
Open panel (4).
NOTE
Cut tiedown straps as required and discard.
3.
Tag and disconnect air lines (33) from valve (34).
4.
Remove two screws (36) and faceplate (35) from front of panel (4).
5.
Remove valve (34) from rear of panel (4).
NOTE
Note position of all fittings to ensure correct installation.
6.
Remove any tees, reducers, adapters etc. from old valve (34).
4
10
9
33
33
34
36
35
0029 00-9
