TM 5-3800-205-23-3
CONTROL PANEL AND AIR HOSES MAINTENANCE - CONTINUED
0029 00
CONTROL PANEL AIR VALVE INSTALLATION
1.
Clean threads of all fittings. Apply antiseizing tape to male threads of fittings and new valve (34).
2.
Install prepared tees, reducers, adapters etc. on new valve (34).
3.
Position valve (34) through rear of panel (4).
4.
Install faceplate (35) and two screws (26) on front of panel (4).
5.
Connect air lines (33) to valve (34). Remove tags.
NOTE
Install new tiedown straps as required.
6.
Close panel (4).
7.
Tighten six screws (9) and panel locks (10).
4
10
9
33
33
34
36
35
0029 00-10
