TM 5-4610-218-12
for the fact that the trailer wheels turn inside the
turning radius of the truck.
b. Transporting.
(c) Backing. When backing the trailer
(1) Cargo trailer.
with the towing truck, the towing truck is steered
(a) Couple the trailer to the truck.
in the opposite direction to the direction desired for
the trailer. If the trailer is to be backed to the right,
(b) Connect the brake air hoses and trailer
the steering wheel of the truck is turned to the left,
cable.
or counterclockwise. The front of the trailer will be
(c) Raise and secure the front caster.
pushed to the left and the trailer wheels will be
(2) Driving the truck and trailer com-
steered to the right.
bination.
(a) General. In driving the truck and
4-10. Reinstallation After Movement.
trailer combination, the overall length of the unit
a. Refer to paragraph 4-5 for installation at a
must be kept in mind when passing other vehicles
new worksite.
and when turning.
(b) Turning. When turning corners, allow
Section III. REPAIR PART, SPECIAL TOOLS, AND EQUIPMENT
repair parts and special tools list manual covering
4-11. Special Tools and Equipment.
organization maintenance for the equipment in TM
No special tools or equipment are required for
5-461 0-218 -20P, Organizational Repair Parts and
maintenance of the water purification unit by the
Special Teds List Manual.
operator/crew and organizational maintenance per-
sonnel.
4-13. Fabricated Tools and Equipment.
There are no fabricated tools or equipment
4-12. Repair Parts.
needed for the maintenance of the water puri-
Repair parts are listed and illustrated in the
fication unit.
Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4-14. Preventive Maintenance Checks and Ser-
vices.
This paragraph contains a tabular listing of
preventive maintenance services and checks which
must be performed by organizational maintenance
personnel. Refer to table 4-1 for the preventive
maintenance checks and services.
4-16
