Agitator Motor Base.

TM 5-4610-218-12

Figure 4-38. Erdlator Agitator Drive Motor, Removal and Installation.

4-40. Agitator Motor Base.

4-41. Erdlator Agitator Speed Reducer.

a. General. The agitator motor base provides

a. General. The speed reducer is located on top

the mounting of the erdlator motor assembly and al-

of the erdlator tank on the bridge rail assembly

lows rapid manual adjustment of the drive belt.

above the erdlator agitator. It reduces the speed

b. Removal. Refer to figure 4-38 and remove the

from the electric motor to the erdlator agitator,

agitator motor base.

b. Removal. Refer to figure 4-41 and remove the

c. Disassembly. Refer to figure 4-40 and disas-

agitator speed reducer.

semble the motor base.

c. Installation. Refer to figure 4-41 and install

d. Clean, Inspect and Repair.

the agitator speed reducer.

(1) Clean all parts with dry cleaning solvent

P-D-680.

4-42. Erdlator Agitator Drive Shaft, Flexible

Coupling and Pillow Block Bearings.

(2) Inspect the guides and toggle screw for

misalignment, cracks, and damaged threads.

a. General. The erdlator agitator drive shaft as-

sembly is located on top of the erdlator tank and

(3) Inspect all other parts for damage.

bridge rail assembly, between the drive motor and

(4) Replace all damaged or unserviceable par-

speed reducer. It transmits the power from the er-

ts.

dlator drive motor to drive the erdlator agitator.

e. Reassembly. Refer to figure 4-40 and reas-

b. Removal. Refer to figure 4-41 and remove the

semble the motor base.

agitator drive shaft, flexible couplings, and pillow

f. Installation. Refer to figure 4-38 and install

the agitator motor base.

4-82

Privacy Statement
Press Release
Contact