TM 5-4610-218-12
Figure 4-116. Van Ceiling Light Toggle Switch, Removal and Installation.
P-D-680.
c. Clean, Inspect and Repair.
(2) Inspect the stowage rack for dents, cracks,
(1) Clean the box and fram with dry cleaning
and rust.
solvent P-D-680.
(3) Remove rust with a wire brush, weld all
(2) Inspect the frame, straps, and box for
cracks, and paint welded spots.
cracks, breaks, and other damage.
(4) Repair dents with a soft hammer.
(3) Repair cracks and breaks by welding,
straighten minor dents with a soft hammer.
(5) Replace an unserviceable stowage rack.
(4) Replace a damaged or defective (un-
serviceable) stowage box or frame.
stall the jack stowage rack.
d. Installation.
4-93. Leveling Jacks.
age box frame.
4-120) are supplied with each van body. The jacks
are used to level and support the van body when the
sory stowage box.
water purification unit is in operation. When not in
use, the jacks are stored in the jack storage rack
4-92. Leveling Jack Stowage Rack Assembly.
a. General. The jack stowage rack is mounted
on the front wall inside the van body.
semble the leveling jack.
c. Clean, Inspect and Repair.
the jack stowage rack.
(1) Clean all parts with dry cleaning solvent
c. Clean, Inspect and Repair.
P-D-680.
(1) Clean the rack with dry cleaning solvent
(2) Inspect all parts for damage.
4-169
