TM 5-4610-223-12
1.
Terminal wires
4.
Terminal screw (4 reqd)
2.
START switch (7 reqd)
5.
STOP switch (5 reqd)
3.
Screw, machine, No. 8-32
x 5/8 in. (4 reqd)
Figure 3-14. START and STOP Control Switches.
3-31. START AND STOP CONTROL SWITCH PUSHBUTTONS.
a.
General. The START and STOP switch pushbuttons are not a part of the switches but they operate the switches
inside the electrical control cabinet. The pushbuttons (fig. 3-15) are located in the electrical control cabinet door
opposite the switches and may be replaced without removing the switches.
WARNING
Dry-cleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and
property. Wear chemical resistant gloves when using solvents, and avoid repeated or
prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent
is 100 degrees F to 138 degrees F (38 degrees C to 59 degrees C).
3-45
