TM 5-4610-223-12
1.
Mounting gasket
6.
Incandescent lamp, 3CP, 24-28V
2.
Mounting plate
7.
Spring nut (2 reqd)
3.
Sheet metal screw, No. 6 x ,
8.
Lens
3/4 in (4 reqd)
9.
Door
4.
Lampholder hose
10. Machine screw, No. 10-24 x
5.
Machine screw, No. 6-32 x
1/4 in. (2 reqd)
1/4 in.
11. Washer, flat, No. 6 (2 reqd)
Figure 4-11. Van Body Clearance Light, Exploded View.
(2)
Assemble lampholder base (4) to mounting plate (2) and install washer (11) and screw (5). Assemble new
gasket (1) to mounting plate.
(3)
Connect lampholder base wiring to van body wiring harness and secure assembled mounting plate (2) to
van body with four screws (3).
(4)
Install lamp (6) in lampholder base (4).
(5)
Position assembled door (7, 8, 9) on mounting plate (2) and install screws (10).
c.
Replace.
(1)
Replace all unserviceable parts.
(2)
Replace gasket (1, fig. 4-11) at installation.
(3)
Replace screws (3, 5 and 10) if damaged.
4-41
