TM 55-1930-209-14&P-1
g.
To set number for totalizer to begin counting from zero or number shown on flowmeter, do the following:
(1)
Press keyboard key 1 (ADVANCE CURSOR).
(2)
Press keyboard key 2 (EDIT THIS ONE).
(3)
Press keyboard number keys to set desired number.
(4)
Push ENTER keyboard key to enter numbers. Note that cursor will shorten.
h.
Push EDIT keyboard key to leave edit mode and return EMS video monitor to normal scanning or push
keyboard key 3 (prompt SELECT NEW TOTALIZER) to return to display page.
i.
When display page appears on video monitor, take one of these three actions.
(1)
Push keyboard key 1 (prompt ADVANCE CURSOR) to move cursor to select new totalizer.
(2)
Push keyboard key 3 (prompt SELECT NEW PAGE) to select a new display page.
(3)
Push keyboard key 4 (prompt RETURN TO EDIT MENU) to return to EDIT MENU.
8-9.4.2.5 Using EDIT MENU option 4 to set time and date on EMS clock
NOTE
EMS maintains a 24 hour clock as well as displaying month, day and year at
bottom of each video monitor display page. When main power is off, a battery
inside main processor keeps clock operating so that next time EMS is turned on,
correct time is shown on display pages.
a.
Push keyboard key 4 (option SET TIME/DATE). Make sure video monitor displays the following and
prompts are in upper right comer of screen.
OLD
NEW*
MONTH
JAN
DAY
31
YEAR
1986
HOUR
16
MINUTE
52
*After editing, new information appears on screen.
NOTE
Cursor will be on 0 MONTH.
b.
Push keyboard key 1 (prompt ADVANCE CURSOR) to move cursor to item (MONTH, DAY, YEAR, etc.)
to be changed.
c.
Push keyboard key 2 (prompt EDIT THIS ONE). Make sure cursor extends through old value.
NOTE
By pushing keyboard number keys (as well as "-" and "."), keys act as calculator
keys and write numbers on video monitor.
d.
Use keyboard keys to enter new values.
e.
Push ENTER keyboard key. Note that cursor will shorten.
8-24
