Preventive Maintenance Checks and Services for ROWPU System (Continued)

Preventive Maintenance Checks and Services for ROWPU System (Continued) - TM-55-1930-209-14P-19_212

Preventive Maintenance Checks and Services for ROWPU System (Continued) - TM-55-1930-209-14P-19_214

TM-55-1930-209-14P-19 Water Purification Barges (NSN 1930-01-234-2165) Workboat Lifesaving and Firefighting Equipment Manual
Page Navigation
52

TM 55-1930-209-14&P-19 Table 3-3. Preventive Maintenance Checks and Services for ROWPU System (Continued) B - Before D - Daily Q - Quarterly D - During W - Weekly S - Semiannually A - After M - Monthly A - Annually INTERVAL ITEM PROCEDURES EQUIPMENT ITEM TO BE CHECK FOR AND HAVE IS NOT READY/ NO. INSPECTED REPAIRED OR ADJUSTED AVAILABLE IF B D A D W M Q S A AS NECESSARY 1) Removal (a) Disconnect battery. (b) Remove alternator cover. (c) Remove jam nut and loosen alter- nator adjusting nut. (d) Loosen mounting nut. (e) Remove bolt and flatwasher from mounting adjustment block (f) Push alternator toward engine. Remove fan belt from vibration damper and alternator pulleys. (g) Tag and disconnect two wires from alternator. (h) Remove two nuts, four flatwash- ers, two lockwashers, and two mounting bolts. (i) Remove alternator. 2) Installation (a) Install alternator. Install two mounting bolts, four fiatwashers, two lockwashers, and two nuts. Hand tighten. (b) Install bolt and flatwasher on mounting adjustment block (c) Install adjusting arm and jam nut Do not tighten. (d) Install fan belt on vibration damper and alternator pulleys. (e) Connect two wires to alternator and remove tags. (f) Adjust fan belt as instructed above. 3-29

Privacy Statement
Press Release
Contact