TM 55-1930-209-14&P-19 Table 15-1.  Preventive Maintenance Checks and Services for Miscellaneous Equipment (Continued) B - Before D - Daily Q -  Quarterly D - During W - Weekly S -  Semiannually A - After M - Monthly A -  Annually INTERVAL ITEM PROCEDURES EQUIPMENT ITEM TO BE CHECK FOR AND HAVE IS NOT READY/ NO. INSPECTED REPAIRED OR ADJUSTED AVAILABLE IF B   D   A   D  W  M   Q   S   A AS NECESSARY • g.  Close incinerating toilet lid after each use. •  • h. Make sure toilet and cubicle are clean. • • i. Remove rust and corrosion. Touch up paint in accordance with TB 43-0144 as necessary.  Do not paint threads or labels. 5 • •  • Bilge System a. Wipe all components clean, especially sludge tank liquid level indicator glass cover. • • • b. Check for leaks and damaged or missing Class III leaks. securements and fasteners.  Repair, replace and/or tighten if required. • • c. Check wiring for loose connections and Cables frayed. frayed cables.  Secure, repair, or replace cables as necessary. • • d. Check that strainer basket is clean and properly installed.  Clean or replace bas- ket as follows: 1) Loosen yoke screw until yoke swings free. 2) Pull basket handle straight up to remove basket.  Go to step 3 to clean and step 4 to replace basket. CAUTION Do NOT have basket well open for more than 10 minutes.  Diverter plug does not completely cut off water and water will seep into open well. 15-11