Engine
Disassembly and Assembly
19.
Put block (40) in position on housing (41) with
the holes in the block in alignment with dowels (42).
Install the bolts that hold the block in place.
20.
Assemble the torque control group as follows:
a.
On 3304 Engines, put retainer (46), bar (49),
spacer (48), contact (44), bar (47) and insulator (43) in
position on bolts (45).
b.
On 3306 Engines, put retainer (46), bar (49), one
spacer (48), contact (44), spring (50), two spacers (48),
insulator (43) and bar (47) in position on bolts (45).
21.
Install the torque control group on block (40) as
shown.
27
