Engine
Disassembly and Assembly
Remove And Install Exhaust Manifold (3304) 1059-
010
START BY:
a. remove turbocharger
b. remove fuel injection lines
1.
Remove bolts (2) and the washers that hold shield
(1) to the engine. Remove the shield.
2.
Remove the nuts, brackets (3) and the washers
between the No. 1 and No. 2 cylinders and between the
No. 3 and No. 4 cylinder.
3. Remove the remainder of nuts (5) and exhaust
manifold (4). Remove the exhaust manifold gaskets.
4. If necessary, remove the studs from the cylinder head.
5.
If the studs were removed from the cylinder head,
put 5P3931 Anti-Seize Compound on the threads that fit
into the cylinder head. Install the studs and tighten them
to a torque of 27 + 4 Norm (20 + 3 Ib.ft.).
6.
Put 5P3931 Anti-Seize Compound on the threads of
the studs. Put the exhaust manifold gaskets and exhaust
manifold (4) in position on the studs, and install the
washer and nut (5) on the first and last stud.
7.
Install brackets (3) between No. 1 and No.
2 cylinder and between No. 3 and No. 4 cylinders with
the holes for bolts (2) on top.
Install the remainder of the washers and nuts (5).
8.
Put shield (1) in position on brackets (3), and install
the washers and bolts (2) that hold it.
END BY:
a.
install fuel injection lines
b.
install turbocharger
48
