Engine
Disassembly and Assembly
3. Slide hose (5) into position, and tighten the two clamps
that hold it.
4. On 3306 Engines install the O-ring seals on pipe (6).
Put the gasket and pipe (6) in position, and install the
bolts that hold it.
5,. On 3304 Engines slide the hose into position on the
turbocharger and the pipe that goes to the cylinder head.
Tighten the hose clamps that hold it.
Turbocharger (AiResearch
T04)
Disassemble Turbocharger (AiResearch
T04)
1052-015
Tools Needed
A
B
C
9S6363
Turbocharger Fixture Group
1
9S8343
Fixture Assembly
1
5S9566
Sliding T-Wrench
1
START BY:
a. remove turbocharger
1.
Put the turbocharger in position on tool
(A).
2.
Put an alignment mark on compressor housing (1)
and the backplate assembly for use at assembly.
Remove the compressor housing from the backplate
assembly.
51