Engine
Disassembly and Assembly
* Engine
NOTICE
Rings (1), (4) and (5) must be installed with
the round outside edge of the rings toward the
bearings.
3.
Install ring (4) in the cartridge housing with tool (A).
4.
Install washer (3) and bearing (2) in the cartridge
housing. Make sure the short dye mark on bearing (2) is
up.
5.
Install rings (1) and (5) in the cartridge housing with
tool (A).
NOTICE
Put 6V2055 High Vacuum Grease in the
groove for seal ring (7) at assembly to one
half or more of the depth of the groove all the
way around.
6.
Install tool (D) in tool (C). Install turbine shaft (6) in
tool (D). Install seal ring (7) on turbine shaft (6) with tool
(H). Install shroud (8) on turbine shaft (6)
61
