Engine
Disassembly and Assembly
3. Loosen clamp (3), and remove housing (4) and clamp
(3).
4. Put cartridge assembly (5) in position on tooling (B).
NOTICE
Do not put a side force on the shaft when the nut is
loosened.
5. Use tooling (C) to remove the nut from the shaft.
6.
Use a press to push the shaft assembly out of the
cartridge assembly.
7.
Remove wheel (6) from the cartridge.
8.
Remove shroud (8) and the seal ring from shaft
assembly (7).
9.
Use tooling (D) to remove snap ring (9) from the
cartridge.
65
