Engine
Disassembly and Assembly
Turbocarger (AiResearch
TW61)
16. Install compressor housing (19) on the cartridge
assembly. Install "V" clamp (20) that holds the
compressor housing to the cartridge housing, and tighten
the bolt to a torque of 14 Nom (125 Ib. in.).
END BY:
a. install turbocharger
Turbocharger (Schwitzer
F302)
Disassemble Turbocharger (Schwitzer
F302) 1052-015
Tools Needed
A
B
C
D
E
9S6363
Turbocharger
Fixture
1
Group
9S6343
Fixture Assembly
1
5S9566
T-Wrench
1
1P1861
Snap Ring Pliers
1
1P1853
Snap Ring Pliers
1
START BY:
a. remove turbocharger
1. Install the turbocharger on tool group (A). Put
alignment
marks
on
the
three
housings
of
the
turbocharger for correct installation and alignment at
assembly.
2. Loosen clamp (2), and remove housing (1) and clamp
(2).
64