EngineDisassembly and Assembly15. Use tooling (C) to install snap ring (14) in thecartridge housing.NOTE: Put 6V2055 High Vacuum Grease in the groovefor the seal ring at assembly to one half or more of thedepth of the groove all the way around shaft (16).16. Install the seal ring on shaft assembly (16).17. Put the shaft assembly in position on tooling (B).18 Put shroud (15) in position on the shaft.19. Put cartridge assembly (17) In position on the shaftassembly.20. Put compressor wheel (18) in position on the shaft.21. Put clean oil’ on the threads on the shaft and the topsurface of the wheel that makes contact with the nut.69
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
