Engine
Disassembly and Assembly
Turbocharger (Schwitzer
F302)
NOTICE
Do not put a side force on the shaft when the nut
that holds the compressor wheel in position is
tightened.
22. Install the nut that holds the compressor wheel in
place. Tighten the nut to a torque of 25 + 1 Nom (18 + 1
Ib. ft.).
23.
Put the cartridge assembly in position in a vise as
shown. Make sure soft jaws are used. Install tooling (E)
on the cartridge assembly to check the end play End play
must be 0. 114 + 0.038 mm (.0045 + .0015 in.).
24. Put housing (20) in position on tooling (D).
25. Put cartridge assembly (19) in position in housing
(20), and install clamp (22). Tighten the clamp to a
torque of 13.6 Norm (120 Ib. in.).
26. Install housing (21) on the cartridge, and install
clamp (23). Tighten the clamp to a torque of 13.6 Nom
(120 Ib. in.).
END BY:
a. install turbocharger
70