TM 10-4320-317-13
Figure 2-11. Wire Rope Loop
(13) Attach one tumbuckle hook (7) to loop in wire rope. Attach other tumbuckle hook (8) to stake (9).
(14) Repeat steps (6) through (13) with opposite end of wire rope.
(15) Using turnbuckles, adjust sag in wire rope (with no load) until rope is taut.
(16) Tie manila rope (1, Figure 2-12) to leading end of hoseline (2). Make sure rope is long enough to cross span.
Figure 2-12. Installing Saddle on Hoseline
NOTE
As each saddle assembly is assembled, inspect saddle for tears and
damaged or missing metal eyelets. Replace damaged saddles.
2-33
