TM 10-4610-229-10
2-5.
STARTUP (CONT)
2
Press injection pump start button. At the same time, turn speed control screw to right to move
speed control lever to center position.
3
Flip control switch up. Hold bypass switch down and press start button. When engine starts, let
up start button. Hold down bypass switch until engine oil pressure gage shows 50 psi (3. 4 kPa
x 100). Go to step 7.
4
Flip control switch up. Turn decompression lever right to position 1.
5
Press injection pump start button. At the same time, turn speed control screw right to move
speed control lever to center position.
6
Hold bypass switch down and turn crank as fast as possible. Decompression lever will move to 0
position. Continue to turn crank rapidly until engine starts. Hold down bypass switch until engine
oil pressure gage shows 50 psi (3.4 kPa x 100).
2-99
