TM 10-4610-229-24
2-57. INJECTION NOZZLE REPLACEMENT (CONT)
b. Installation
1
Install fuel injection nozzle and bow fastening.
2
Install two flatwashers and nuts. Torque nuts to 8-11 ft lb.
3
Install injection line. Torque line nut to 15-18 ft lb.
4 Install flatwasher on hollow screw. Insert hollow screw through fuel return line end. Install other flatwasher.
Install return line with hollow screw.
5 Repeat steps 1 thru 4 for each nozzle to be installed.
2-58. FUEL DELIVERY LINE REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Use With
Tools
Boost Pump Assembly
General Mechanic's Automotive Tool
Kit, item 10, apendix B
Common No. 1 Organizational
Maintenance Automotive
Maintenance and Repair Shop
Equipment, item 11, appendix B
NOTE
All fuel delivery lines are replaced the same way.
a. Removal
1 Remove line nuts from ends of line.
2-130
