TM 10-4610-229-24
2-55. OIL COOLER REPLACEMENT/REPAIR (CONT)
c. Assembly and Installation
CAUTION
When tightening plug do not damage seal. Damaged seal could create oil leak.
1
Install ball, spring, ring, and plug in oil cooler. Tighten plug.
2
Install oil cooler, aligning oil line ports with oil lines.
3
Install three lockwashers and bolts.
4
Connect oil cooler lines to oil line ports. Tighten fittings.
5
Install air housing. Latch six clips.
2-56. STARTER REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Use With
Supplies
Boost Pump Assembly
Tags, item 34, appendix C
Tools
Equipment
Condition
General Mechanic's Automotive
Para Condition Description
Tool Kit, item 10, appendix B
2-16
Battery disconnected.
2-126