TM 10-4610-229-24
2-71. CONTROL PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
j. Pilot Light Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
1
Unplug pretreatment assembly power cable.
2
Tag and remove wires from back of light assembly
3
Remove lens retainer, lens, and rubber washer.
4
Remove bulb, nut, retainer, flatwasher, and light assembly.
5
Install flatwasher on light assembly. Install light assembly in electrical enclosure.
6
Install retainer, nut, and bulb.
7 Install lens and rubber washer in lens retainer. Install lens assembly on light assembly.
8
Install wires on back of light assembly.
9
Plug in pretreatment assembly power cable.
2-185
