TM 10-4610-229-24
2-72. SKID REPLACEMENT (CONT)
NOTE
Two persons are required for next step.
3
Following instructions on instruction plate, use suitable lifting device to raise skid. Have one person aline holes
on support panels and skid. Install eight bolts, flatwashers, lockwashers, and nuts on bottom of skid.
4
Install six bolts and nuts on support panels.
5
Install gage panel support. Install two bolts, lockwashers, and nuts.
6
Install control panel assembly (para 2-71).
7
Install chemical metering pump (para 2-70).
8
Install gage panel (para 2-69).
9
Install cartridge filter assembly (para 2-68).
11
Install temperature gage, flowmeter, piping, and valves (para 2-66).
2-73. MULTIMEDIA FILTER ASSEMBLY REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Use With
Tools
Multimedia Filter Assembly
Hose wrench, item 8, appendix B
Lifting device, item 13, appendix B
Sling, item 15, appendix B
2-189
