TM 10-4610-229-24
2-72. SKID REPLACEMENT (CONT)
a. Removal
1
Remove two nuts, lockwashers, and bolts. Remove gage panel support.
2
Remove six nuts and bolts from support panels.
NOTE
Two persons are required for next step.
3
Following instructions on instruction plate, use suitable lifting device to raise skid. Have one person support the
support panels. Remove eight nuts, lockwashers, flatwashers, and bolts from bottom of skid. Remove two
support panels.
4
Remove instruction plate.
5
Remove skid.
b. Installation
1
Install skid.
2
Install instruction plate.
2-188