TM 10-4610-229-24
Table 2-1. Preventive Maintenance Checks and Services - Continued
Q - Quarterly
S - Semi-Annually
INTERVAL
ITEM
ITEM TO BE INSPECTED
NO.
Q
S
PROCEDURE
High Pressure Pump Assembly (Cont)
61
•
Auxiliary Fuel Supply. Check auxiliary fuel tank and
lines for damage and leaks. Replace lines as required
(para-2-12). If tank is damaged, notify your
supervisor.
Reverse Osmosis Block Assembly
62
•
Spool Assemblies. Check for cracks and leaks. Check
throttling valve for proper operation. Replace or
repair spool assemblies or throttling valve as required
(para 2-112 or 2-113).
63
•
Product Tube Assemblies. Check for cracks, leaks, and
loose connections. Replace as required (para 2-115).
64
•
Pressure Tube Assemblies. Check for cracks and leaks.
Replace as required (para 2-116).
Section V. TROUBLESHOOTING
2-8.
TROUBLESHOOTING. Table 2-2, Troubleshooting, lists common malfunctions which may be found during
normal operation or during an inspection, check procedure, or scheduled testing. Perform the tests/ inspections and
corrective actions in order listed. This manual cannot list all malfunctions that may occur or list all tests/inspections and
corrective actions. If a malfunction occurs that is not listed or covered in corrective action, notify your supervisor.
TROUBLESHOOTING SYMPTOM INDEX
RAW WATER PUMP ASSEMBLY
Page
PUMP MALFUNCTIONS
1
Pump fails to operate (No liquid delivery) ............................................................................
2-11
2
Low outlet pressure .............................................................................................................
2-12
3
Water delivery stops suddenly .............................................................................................
2-12
4
Pump vibration. Engine running normally ...........................................................................
2-12
5
Water runs from drain holes ................................................................................................
2-12
2-9
