TM 10-4610-229-24
Table 2-1. Preventive Maintenance Checks and Services - Continued
Q - Quarterly
S - Semi-Annually
INTERVAL
ITEM
ITEM TO BE INSPECTED
NO.
Q
S
PROCEDURE
Boost Pump Assembly (Cont)
24
•
Fuel Pump. Check for cracks, leaks, and loose mounting
hardware. Tighten loose mounting hardware. Replace as
required (para 2-45).
25
•
Air Filter. Inspect air filter and gasket for proper
installation, cracks, breaks, and loose connections.
Replace as required (para 2-46).
NOTE
If pump is in continuous operation, adjust belts weekly.
26
•
Fanbelt. Check fanbelt adjustment. Adjust as required
(para 2-48).
27
•
Oil Filter Head. Check for cracks and leaks. If
damaged, notify your supervisor.
28
•
Starter. Check for loose mounting hardware and wire
connections. Tighten as required. Start engine. (See
TM 10-4610-229-10.) Listen for unusual noise while
starting. Replace starter as required (para 2-56).
29
•
Alternator. Check for loose mounting hardware and wire
connections. Tighten as required. Start engine. (See
TM 10-4610-229-10.) Listen for unusual noise. Replace
alternator as required (para 2-52).
30
•
Muffler Assembly. Check for cracks, leaks, and loose
mounting hardware. Tighten hardware. Replace muffler
as required (para 2-49).
31
•
Nozzle Holder. Check for loose mounting hardware and
leaks. Tighten loose mounting hardware.
32
•
Cooling System. Check area around engine cylinder head
for dirt and trash. Clean cylinder head and cylinder
head fins. (Sec TM 10-4610-229-10.)
33
•
Skid. Check skid for cracks and other damage. If
damaged, notify your supervisor.
2-5
