TM 10-4610-229-24
2-118. PRODUCT MANIFOLD REPLACEMENT (CONT)
2
Remove two hanger nuts from top of product manifold.
3
Remove two nuts and flatwashers. Remove U-bolt.
4
Remove two nuts and bolts. Remove clamp.
5
Remove product manifold.
b. Installation
1
Install product manifold. Install two hanger nuts.
2
Install clamp. Install two bolts and nuts.
3
Install U-bolt. Install two flatwashers and nuts.
4
Install 16 product tubes on product manifold.
5
Install brine manifold (para 2-117).
6
Install product spool assembly (para 2-113).
2-119. SKID REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Use With
Personnel Required
Reverse Osmosis Block Assembly
Two
Tools
Equipment
Condition
General Mechanic's Automotive
Para
Condition Description
Tool Kit, item 10, appendix B
Lifting devices (2), item 13,
2-118
Product manifold
appendix B
removed.
Sling, item 15, appendix B
2-116
Pressure tubes removed.
2-291