TM 10-4610-229-24
2-119. SKID REPLACEMENT (CONT)
a.
Removal
1
Remove needle valve and elbow from top of inlet manifold.
2
Remove nut and flatwasher. Remove inlet manifold.
3
Remove instruction plate from skid.
4
Remove four drive screws. Remove data plate from frame.
5
Attach lifting device to mounting frame shackles. Support weight of mounting frame.
6
Using forklift, raise mounting frame and skid.
7
Remove four screws, flatwashers, and nuts. Remove mounting frame from skid.
8
Remove lifting device from frame.
9
Remove shackles from mounting frame.
10
Remove skid.
2-292
