TM 10-4610-229-24
2-119. SKID REPLACEMENT (CONT)
b.
Installation
1
Using forklift, install skid. Raise skid above ground.
2
Install shackles on mounting frame.
3
Using lifting device, position mounting frame on skid. Install four nuts, flatwashers, and screws.
4
Lower mounting frame and skid. Remove lifting devices.
5
Install data plate on mounting frame. Install four drive screws.
6
Install instruction plate on skid.
7
Install inlet manifold. Install flatwasher and nut.
8
Install elbow and needle valve on top of inlet manifold.
9
Install pressures tubes (para 2-116).
10
Install product manifold (para 2-118).
2-120. DISCONNECT ADAPTER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Use With
Equipment
Condition
Reverse Osmosis Block Assembly
Para
Condition Description
Tools
System configured for
membrane cleaning.
General Mechanic's Automotive
(See TM
Tool Kit, item 10, appendix B
10-4610-229-10.)
Supplies
Silicone lubricant, item 22,
appendix C
2-293
