TM 10-4610-229-24
3-3. HIGH PRESSURE HOSE ASSEMBLY REPAIR
2
Using swaging press, secure couplings to hose with ferrules.
NOTE
Make sure to weld rings on same side of hose.
3
Weld a ring to each ferrule in accordance with drawing 13214E9225, Class 1, Type 3.
4
Install cable in each ring. Secure ends with cable clamp.
5
Using crimping tool, install banding strap over hose and cable.
3-4. RAW WATER PUMP REPAIR
This task covers:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
INITIAL SETUP
Use With
Equipment
Condition
Raw Water Pump Assembly
Para
Condition Description
Tools
2-22
Pump removed.
General Mechanic's Automotive
Supplies
Tool Kit, item 10, appendix B
Dial indicator, item 34,
Rags, item 29, appendix C
appendix B
3-7
