TM 10-4610-232-12
Figure 4-35. Junction Box No. 3
(5) Disassemble terminal board (11) by loosening capscrew (12). Slide retainer (13) down rail (19)and remove end
plate (14). Remove fourteen terminal strips (15) and jumpers (16) as required.
(6) If necessary, removecapscrews(18) and Iockwashers (19) and remove rail (20).
(7) If necessary, remove capscrews (21) and subpanel (22). Enclosure (23) is now free.
a. Replace unserviceable parts.
b. Replace damaged nameplates and wire markers (para, 4-10).
c. Repair damaged wire ends by cutting the end of wire off, strip off insulation and reinsert into terminal blocks.
4-147
