TM 10-4610-232-12
a. Refer to Figure 4-35 and install enclosure (17). Secure with four capscrews (14), Iockwashers (15) and washers
(16).
b. Install four cable fittings with seal washers (13) on enclosure (17) and secure with conduit nuts (6).
C. Slide nuts (7), retainers (8) and bushings (9) on harness assemblies (10, 11, 12 and 18). Push harness assemblies
into the enclosures through fittings (13) and tighten four nuts (7) on fittings (13).
d. Connect wires from cables (10, 11, 12 and 18) to terminal board (11 ) as tagged (para. 4-1 0). Refer to Table 4-4 for
wire connections if tags were lost.
e. Screw connectors (1 and 2) onto their respective connectors.
f. Install cover (5) and secure with clips (4) and capscrews (3).
Table 4-4. Junction Box Wire List
4-149
