TM 10-4610-232-12
c. Replace any missing or damaged components or hardware.
d. Replace assembly if outer shell (14) is cracked or damaged.
REASSEMBLY.
a. Install preformed packing (19) and gasket (18) on Inner strainer (20).
b. Install overscreen (17) and gasket (16) and screw cap (15) onto inner strainer (20).
c. Lower entire assembly (13) into outer shell (14).
d. Install clamp (12) and tighten.
e. If removed, install bracket (11, Figure 4-50, sheet 1) and secure with four capscrews (8), lockwashers (9) and
washers (1 0).
f. If necessary, install piping (para. 4-45).
INSTALLATION.
a. Install gasket (7) and position strainer assembly (6) on lower piping. Install and tighten clamp (1).
b. Install rubber cushion (5) and clamp (4). Secure filter assembly (6), cushions (5) and clamp (4) with capscrew (2),
washers (3) and locknut (3A).
Figure 4-50. Basket Strainer (sheet 2 of 2)
(MODEL WTA-060 ONLY)
4-198 Change 7
