TM 10-4610-232-34
2-12. RAW WATER PUMP MOTOR. This task covers:
a. Replace.
b. Disassembly.
c. Testing.
d. Repair.
e. Reassembly.
INITIAL SETUP.
Tools, see TM 10-4610-232-12, Appx B,
Equipment Condition:
Sec Ill, Ref Code (No.)
Cable removed (para. 4-15, TM 10-4610-232-12).
Tool Kit, General Mechanics Automotive (1)
Multi meter (4)
References:
Puller Kit (4)
Service and Repair of Bearings, TM 9-214.
Brass Drift (4)
General Safety Instructions:
Growler (4)
WARNING
Observe specific Warning in the text.
NOTE
The stub shaft may require replacement when replacing the motor. Refer to para.
2-11.
The raw water pump motor can not be replaced as a unit without first disassembling the raw water pump. Refer to
para. 2-11, disassemble the raw water pump and replace the motor. Then, reassemble the pump on the replacement
motor.
Figure 2-14. Raw Water Pump Motor
2-92
