TM 10-4610-232-34
v. Remove nipple (28) from pressure switch PSH7.
w. Remove remaining half of union (25) from nipple (29).
x. Remove nipple (29) from tee (16).
y. Remove swivel (30) from tank valve (2).
z. Remove seal washer (31) from swivel fitting (30).
aa. Remove swivel fitting (30) from tee (16).
REPAIR.
a. Repair by replacement of faulty components.
b. Repair leaking fittings by using antiseize tape and pipe thread sealant.
c. Disassemble check valve and clean it out (para. 4-10, TM 10-4610-232-12).
a.
b.
c.
d.
e.
f.
g.
h.
Apply antiseize tape and pipe thread sealant
Install swivel fitting (30) in tee (16).
Install seal washer (31) in swivel fitting (30).
Install swivel fitting (30) on tank valve (2).
to all external pipe fitting threads.
Install nipple (29) in tee (16) and union half (25) on nipple (29).
Install other half of union (25) on high pressure line (26).
Install union half (27) on high pressure line (26).
Install other half of union half (27) on nipple (28) and install nipple (28) in pressure switch (PSH7).
i. Mount high pressure line (26) to unit wall and secure with wire ties (para. 4-10, TM 10-4610-232-12). Close
unions (25 and 27).
j. Install washer (24) on fitting (23) and install fitting (23) in air filter base (18).
k. Install street elbow (22) on fitting (23) and connect high pressure line (21) in street elbow (22).
l. Connect connector (19) with air line (21) on pressure relief valve (20).
m. Install nipple (17) on air filter base (18) and install check valve (14) (para. 4-10, TM 10-4610-232-12) with arrow
upon nipple (17).
n. Install union half (10) on nipple (15) and install in tee (16).
o. Install high pressure line (13) on check valve (14).
p. Install high pressure line (13) on tee (10).
q. Install other half union (12) on tee (10).
r. Install nipple (11) in air regulator and install other half of union (8) on nipple (11).
s. Install high pressure line (9) on tee (10) and connect union (12).
t. Install union half (8) on high pressure line (9) and close union (8).
u. Close air filter bleed valve (5).
v. Close manifold bleed valves (4 and 3).
w. Open air tank valve (2).
x. Turn compressor switch (1) to ON position.
2-100
