TM 10-4610-232-34
2-17. HIGH PRESSURE WATER PIPING AND HOSES. This task covers:
a. Inspection.
b. Removal.
c. Repair.
d. Installation.
INITIAL SETUP.
Tools, see TM 10-4610-232-12, Appx B,
Equipment Condition:
Sec Ill, Ref Code (No.):
ROWPU shutdown. System drained.
Tool Kit, General Mechanics Automotive (1)
General Safety Instructions
Materials/Parts:
Victaulic Gaskets
WARNING
Suitable Tags
Observe specific Warning in text.
Glycerin (Appx B, Sec II, Item 16)
INSPECTION.
NOTE
This procedure is applicable to all high pressure inlet and outlet tubing.
NOTE
When removing more than one high pressure tube at a time, tag the clamps and
tubes to simplify installation.
a. Visually check all hoses, tubing and fittings for leaks.
b. If any leaks are detected, refer to repair procedure.
Figure 2-19. High Pressure Piping and Hose Connections
2-101
