TM 10-4610-232-34
Figure 2-20. Electrical Installation (sheet 2 of 4)
(3) Refer to View D, sheet 2, and remove the sensor as follows:
(a) Remove four capscrews (1) and eight washers (2) (two washers per capscrew).
(b) Remove sensor (3) and gasket (4) from pipe (5).
d. Refer to sheet 2 and remove cables (W69) as follows:
(1) Tag and disconnect cable at the main control panel (para. 2-21).
(2) Remove tie wraps which secure the cable to the walls of the ROWPU.
Change 3 2-105
