TM 10-4610-232-34
2-65. ACCESSORY TABLE. This task covers:
a. Repair.
Tools, see TM 10-4610-232-12, Appx B.
Equipment Condition:
Sec Ill, Ref Code (No.):
High pressure solenoid and outlet air filter
TOOI Kit, General Mechanics Automotive(1)
removed (paras. 2-51 and 2-59).
Wire Brush (6)
Welding Equipment (6)
References:
TM 9-237 and TM 43-0139
Materials/Parts:
Lockwashers (TM 10-4610-232-24P)
Washers (TM 10-4610-232-24P)
REPAIR.
NOTE
The right table top, right table supports and table are removed at direct support
maintenance because the outlet high pressure solenoid valve and air filter have to be
removed at direct support maintenance.
a. Refer to Figure 2-72. Replace the right table top (1) by removing four screws (2).
b. Replace frame (3) by removing three screws (4), Iockwashers (5) and washers (6).
c. Replace right table support (7) by removing two capscrews (8), four washers (9), two Iockwashers (10) and two
nuts (1 1).
d. Clean dirt and paint from area to be repaired.
e. Weld damaged areas. For welding procedures, refer to TM 9-237.
f.
g.
Paint all areas repaired. Refer to TM 43-0139.
Replace parts which can not be repaired by welding.
Figure 2-72. Accessory Table
2-212
