TM 10-4610-232-34
a. Install guard plate (39) on pump skid (40). Secure with four capscrews (34), washers (35), nuts (36), Iockwashers
(37) and washers (38).
b. Install spring nuts (33), channels (24), and supports (28 and 29), if removed.
c. Install support (29). Secure with two capscrews (30), Iockwashers (31) and washers (32).
d. Install supports (28). Secure with capscrews (25), Iockwashers (26) and washers (27).
e. Install channels (24) and panels. Secure to supports (28) with capscrews (20), lockwashers (21) and washers
(22).
f. If removed, secure nameplate (19), with rivets (18) (para. 4-10, TM 10-4610-232-12) to top plate (16).
g. Install rails (17) and top plate (16). Secure with ten capscrews (13), Iockwashers (14) and washer (15)
h. Install two fastener loops (12) on panel (23). Secure with four capscrews (8), nuts (9), Iockwashers (10) and
washers (11). Install straightedge (7).
i. If removed, install neoprene trim (6) on screen (5)
j. Mount screen (5). Secure with sixteen capscrews (1), Iockwashers, (2), washers (3) and clamp (4)
2-240
