TM 10-4610-239-24
TM 08580B-24/3
(n)
Screw insert (9) on shaft until tang (10) of insert goes into shaft notch (11).
(o)
Using insertion tool (8) and vernier caliper, adjust distance (12) between end (13) of insert (9) and tip
(14). Turn handle until distance is equal to installation depth below surface of tapped hole.
(p)
Push down stop collar (15) until it contacts body of insertion tool (8).
(q)
Tighten setscrew (6).
(r)
Turn handle until tang of insert (9) is even with tip of insertion tool (8).
2-61
