TM 10-4610-239-24
TM 08580B-24/3
CAUTION
Insertion tool must be straight and not allowed to wobble when
installing insert. Equipment can be damaged.
Do not force insert into tapped hole. Threads will be damaged.
(s)
Put tip of insertion tool (8) against tapped hole being sure that insertion tool is straight.
(t)
Slowly turn handle of insertion tool right until stop collar (15) contacts body of insertion tool.
(u)
Turn handle of insertion tool (8) to the left until insertion tool can be removed.
(v)
Place tang breakoff tool (16) in tapped hole with installed insert.
(w)
Push down end of breakoff tool (16) until tang (10) breaks off of insert.
2-62
