TM 10-4610-239-24
TM 08580B-24/3
REMOVAL.
a.
Check all wires for readable wire labels (1).
b.
If wire labels (1) are missing or cannot be read, tag wires.
c.
Remove nut (2), bolt (3), and clamp (4).
d.
Pull six connectors (5) from spring clips (6).
e.
Separate two halves of six connectors (5).
f.
Remove nut (7), bolt (8), and clamp (9).
g.
Pull six connectors (10) from spring clips (11).
h.
Separate two halves of six connectors (10).
NOTE
There are eight clamps holding wiring harness to flatbed cargo trailer
frame. All are removed the same. One is shown.
i.
Remove nut (12) and clamp (13).
NOTE
There are 11 grommets on the wiring harness. All are removed the
same. One is shown.
j.
Work grommet (14) out of hole in chassis (15) and remove grommet from wiring harness (16).
CAUTION
Connectors can be damaged if wiring harness is not pulled through holes
in chassis carefully.
k.
Working from front of flatbed cargo trailer to rear, pull wiring harness through holes in chassis and remove wiring
harness from flatbed cargo trailer.
2-122
