TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION.
CAUTION
Connectors can be damaged if wiring harness is not pulled through holes
in chassis carefully.
a.
Working from rear of flatbed cargo trailer to front, pull wiring harness through 11 holes in chassis.
NOTE
There are 11 grommets on the wiring harness.
All are installed the
same. One is shown.
b.
Install grommet (14) on wiring harness (16) and work grommet into hole in chassis (15).
NOTE
There are eight clamps holding wiring harness to flatbed cargo trailer
frame. All are installed the same. One is shown.
c.
Position clamp (13) and install nut (12) on bolt.
d.
Use wire labels (1) to match halves of four connectors (10). Push matching halves together until they lock.
e.
Push four connectors (10) into spring clips (11).
f.
Position clamp (9) and install bolt (8) and nut (7).
g.
Use wire labels (1) to match halves of six connectors (5). Push matching halves together until they lock.
h.
Push six connectors (5) into spring clips (6).
i.
Position clamp (4) and install bolt (3) and nut (2).
2-123
