TM 10-4610-239-24
TM 08580B-24/3
ASSEMBLY.
a.
Using brass drift pin, tap spider bushing (23) into spider (8).
b.
Install new seal (22), camshaft retaining washer (21), and camshaft (20).
c.
Install new seal (19), camshaft spacer washer (18), and cam lockring (17).
d.
Install two lubrication fittings (14).
e.
Using hand grease gun, force grease into spider lubrication fitting (14) until grease comes out
along camshaft (20). Wipe off grease.
f.
Using hand grease gun, force grease into spider lubrication fitting (14) until grease comes out
along camshaft (20). Wipe off grease.
g.
Install two brake rollers (13), brake roller pins (12), and roller retaining rings (11).
h.
Install one retract spring pin (10) in each brakeshoe (26).
i.
Install one end of retract spring (9) on one retract spring pin (10).
j.
Install free end of retract spring (9) on other retract spring pin (10).
k.
Install tow retaining rings (5) and flat washers (4) on two anchor pins (3).
l.
Position two anchor pin links (6) on opposite sides of brakeshoes (26).
m.
Push free ends of brakeshoes together while inserting two anchor pins (3) through brakeshoes
(26) and anchor pin links (6).
n.
Install two anchor pin lockwashers (2) and anchor pin nuts (1).
o.
Adjust service brakes. Refer to paragraph 2-73.
2-152
