TM 10-4610-239-24
TM 08580B-24/3
2-73. ADJUST SERVICE BRAKES.
This task covers:
Adjust.
INITIAL SETUP.
a.
Tools.
Tool Kit (Appx B, Sect III, Item 10).
b.
Equipment Condition.
Leveling jacks set (TM 10-4610-239-10).
ADJUST.
NOTE
If hub and drum assembly has been removed, install hub and drum
assembly. Refer to paragraph 2-66.
a.
Remove cotter pin (1) and clevis pin (2).
b.
While rotating hub and drum assembly (3) by hand, rotate slack adjuster arm (4) away from
clevis (5) until drum drags on brake.
2-153
