TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY.
a.
Remove street elbow (1).
NOTE
Cover is installed under tension by loosening eyenuts in a few turns at a time in an alternating pattern.
b.
Loosen six eyenuts (2) and rotate assembly out of notches in cover (3). Remove cover with
attached part.
c.
Position cover (3), handle down, on two stacks of 2 x 4's.
d.
Remove eight top seat cups (4) and springs (5).
e.
Remove and discard O-ring (6).
f.
Remove locknut (9) from bolt (10).
g.
Remove eyenut (2), washer (8), and eyebolt (11).
h.
Remove and discard eight filter tubes (7).
CLEANING.
Using soft cloth and mild soap solution, wash all parts. Rinse thoroughly with clean water. Dry with
clean, soft cloth.
INSPECTION.
a.
Inspect eyebolts for cracks, damaged threads, bent shafts, or deformed eyes. Replace as required.
b.
Inspect bolts for cracks, damaged threads, or bent shafts. Replace as required.
c.
Inspect nuts and street elbow for deformity, cracks, or damaged threads. Replace as required.
d.
Inspect skirt assembly cover and shell for cracks, chips, holes, or damaged threads. Replace as required.
e.
Inspect bottom seat cups (4) for deformity or looseness. Replace shell if bottom seat cups are
loose or damaged.
f.
Inspect top seat cups and springs for deformity or cracks. Replace as required.
2-176
