TM 10-4610-239-24
TM 08580B-24/3
REMOVAL (Cont)
d. Remove two bolts (10) and lockwashers (11) and remove mounting plate (12). Discard lockwashers.
INSTALLATION.
a. Position mounting plate (12) on backwash valve (13) and install two lockwashers (11) and bolts (10).
NOTE
Apply antiseize tape to male pipe threads before installation.
b. Install two adapters (8) and pipe section with check valve (9) on backwash valve (13).
c.
Position backwash valve (13) on back of control panel with valve stem through cutout.
d. Install three gaskets (7) and clamps (6) and six screws (5) and nuts (4).
e. Install handle (3), flat washer (2), and nut (1).
2-242
