TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
d.
Remove oil drain valve (4) from pipe nipple (8).
e.
Remove pipe nipple (8) from R.O. pump (9).
f.
Remove air breather (10).
INSTALLATION.
NOTE
Apply antiseize tape to male pipe fittings before installation.
a.
Install pipe nipple (8) on R.O. pump (9).
b.
Install oil drain valve (4) on pipe nipple (8).
c.
Install handle (7), washer (6), and nut (5).
d.
Install adapter elbow (3) on oil drain valve (4).
e.
Install drain hose (2) and tighten clamp (1).
f.
Refill R.O. pump assembly with oil. Refer to LO 10-4610-239-12/LI 08580B-12.
g.
Install air breather (10).
2-307
